Ceiling Fan / April 24, 2018 / Glenna Gillespie
Ceiling fan blades should be evenly weighted and balanced by the manufacturer prior to shipment to avoid wobble. However, if the fan is wobbly after installation, make sure that all connections are properly aligned and tightly fastened. Hold a yardstick vertically along the edges of the blades to check their alignment. If a blade is misaligned, try gently bending the misaligned blade holder into proper position. If all blades are aligned, use a balancing kit to correct the problem. These kits are either provided with the fan or can be sent by the manufacturer. Ceiling fans can weigh as much as 50 pounds, so most ceilings need to be braced to support the additional weight.
Installing a ceiling fan is much more complicated than installing light fixture. It is advised to use the appropriate UL-listed metal outlet box marked \"For Use with Ceiling Fans.\" The box is mounted above the ceiling and houses all wiring needed to operate and connect the ceiling fan. If you are replacing a ceiling fixture, most likely you will need to replace the electrical box. To avoid complications, it is best to hire a licensed electrician to install the ceiling fan. Be sure to check references, and make sure the contractor is properly insured and holds the proper certification.